With an atmospheric particulate analyzerEasy dustHelps aerosol components such asPM10,PM2.5,PM1andtspThe measurement can be done simultaneously by a machine.

Easy dustEspecially for indoor and outdoor air quality monitoring.

Easy dustThere are many installation methods:19Inch bracket installation, outdoor protective box installation orcams(Integrated in portable air monitoring systemcams) The system is installed together.

Easy dustInstalled in a protective box

Application areas

Widely applicable to industrial sanitation, point source location monitoring, outdoor air quality, indoor air quality and other scenarios.

Main features

youThe most measured at the same time4Medium aerosol index

youμg/m3orUnited States/No 3Two units

youRS232interface

you19Inch bracket or desktop protective cabinet

youEasy to carry and transport

Optional configuration

youAnalog output:0-10V

youTouch alarm

Measurement principle

Like traditional optical particle counters,Easy dustThe optical counter measures the scattered light of different particles by laser, and these measured data are used to determine the size of the particles and the concentration of the particles.PM1,PM2.5,PM10andtspThe value of the particle size and concentration data are calculated.

Technical parameters

youParticle range (μm) Spherical equivalent size:0.38-17

youSampling interval (seconds):1-10

youTotal traffic:1.2l/minute

youSampling flow:220 Beautiful/minute

youMaximum particle count rate:10,000/Seconds

youDetection limit (PM10):0.01μg/m3(minimum);2000μg/m3(maximum)

youSignal output: digital signal isRS232, the analog signal is0-10VD C(Optional)

youInput voltage:230V/50Hzor115V/60Hz

yousize:200 Little 200 Little 150 Mom(with protective box)

youWeight: Depending on the application, approximately2 Have seen it

Origin: GermanyMC Z