AMS fully automatic discrete analyzers are an analysis and testing method that automates colorimetric analysis. It completely simulates artificial colorimetric method. Through a robot, samples, reagents and colorimetric agents are added to the colorimetric tube to produceThe color reaction, its concentration is proportional to the color, the light transmission intensity is detected by the colorimeter to obtain the corresponding peak electrical signal, and then the corresponding concentration is automatically calculated through the standard curve. All steps are controlled by the robot and computer to achieve mechanization andIntelligent.
Performance Features
Advanced technology:Using direct-read intermittent chemical analyzer, direct reaction in the cuvette and colorimetric; no flow cell, reducing cross-contamination between sample reagents; real sample blanks and reagent background detection; cuvettes can be reused to reduceThe cost of consumables is to be used; the automatic intelligent cleaning of cuvette workstation and optical self-test system ensures the cleaning quality of colorimetric tubes. Before each measurement, the colorimetric tubes are automatically cleaned and optically tested, and then used after passing; high-precision digital detectors are used to distinguishThe rate is as high as 0.0001Abs; 9 filters can be placed at the same time, and up to 9 parameters can be analyzed simultaneously.
Powerful:At the same time, multiple parameters and samples are measured without affecting each other; the instrument has more than 900 built-in methods and can also be edited by itself.
Highly automated and intelligent:Automatic programming, one-click start analysis, realizing unattended; fully automatic cadmium column reduction module to measure nitrate; the injection robot arm has a liquid level sensor, maintains the liquid level below 2mm to take samples, and has anti-blocking function; samples, reagents and cleaning liquidUse low-volume alarms to automatically pause the instrument and issue an alarm to remind the user to continue to run automatically after adding it.
Easy to operate:All users need to do is to set up methods on the software, put samples and reagents in accordance with the software, and the others are automatically completed by the instrument (including standard sample configuration, automatic conversion between methods, automatic dilution of overflow range samples, etc.);After hours of training, you can perform daily operations and maintenance; after a day of training, you can develop your own automated methods according to national standards.
Simple maintenance:No complex flow paths, extremely simple maintenance.
High efficiency, high throughput, low cost:High analysis speed up to 200 samples per hour; load 126 samples at a time, and samples can be added continuously during the test; 16 reagent positions can be used to analyze 9 parameters at a time; it has a fully automatic cuvette cleaning device, and reusablecuvettes; the reagent consumption is small, the small reaction volume is 300μl, and only 40mL of reagent is required to determine 400-600 samples; there are few consumables, no pump tubes, hot tubs, circulation cells, glass rings and other consumables are required, and the maintenance cost is greatly reduced.
Application areas:Determination of tobacco total nitrogen, total phosphorus, chlorine, phosphate, nitrate/nitrite, hydrocyanic acid, Cr6+, volatile acid, ammonia, acetaldehyde, amino nitrogen, malic acid, citric acid, etc.