The plastic water sample collector is all composed of plastic (PVC) structure, with a large inlet for easy rinsing.The sampling barrel is completely free of metal.The closing devices at the end of the sampler are connected to each other by a solid rubber tube.make

After the hammer falls along the cable from outside the water surface, release the end shutter and close the water collector.

When operating a single sampler on the cable, we recommend that you use an intermediate mounting bracket to keep the sampler vertical.

If a series of water extraction work is required on a cable, another hammer can be installed under each sampler. When the end closer of the previous water extraction device is closed, the hammer under it will be biased.Release, thus inspiring a series of sampling efforts along the cable.

Plastic water sample collector ordering information:

436 300 Plastic Water Sample Collector (PWS), containing hammer, volume 1.7L

436 302 Plastic water sample collector (PWS), containing hammer, volume 2.5L

436 305 Plastic water sample collector (PWS), containing hammer, volume 5.0L

436 315 Plastic water sample collector (PWS), containing hammer, volume 10.0L

436 325 Plastic water sample collector (PWS), containing hammer, volume 30.0L